Текст страницы
18 | English
u Do not abuse the cord. Never use the cord for carry-
u Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
u Disconnect the plug from the power source and/or re-
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
u When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
u If operating a power tool in a damp location is un-
u Store idle power tools out of the reach of children and
avoidable, use a residual current device (RCD) protec-
ted supply. Use of an RCD reduces the risk of electric
shock.
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Personal safety
u Maintain power tools and accessories. Check for mis-
u Stay alert, watch what you are doing and use common
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious per-
sonal injury.
u Keep cutting tools sharp and clean. Properly main-
u Use personal protective equipment. Always wear eye
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
u Use the power tool, accessories and tool bits etc. in
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal in-
juries.
u Prevent unintentional starting. Ensure the switch is in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
u Keep handles and grasping surfaces dry, clean and
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
u Remove any adjusting key or wrench before turning
Service
u Have your power tool serviced by a qualified repair
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal in-
jury.
u Do not overreach. Keep proper footing and balance at
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
all times. This enables better control of the power tool in
unexpected situations.
Safety warnings for angle grinder
u Dress properly. Do not wear loose clothing or jew-
Safety warnings common for grinding, sanding, wire
brushing or cutting-off operations:
u This power tool is intended to function as a grinder,
ellery. Keep your hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
u If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
sander, wire brush, hole cutter or cut-off tool. Read all
safety warnings, instructions, illustrations and spe-
cifications provided with this power tool. Failure to fol-
low all instructions listed below may result in electric
shock, fire and/or serious injury.
u Do not let familiarity gained from frequent use of tools
u Operations such as polishing are not to be performed
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe in-
jury within a fraction of a second.
with this power tool. Operations for which the power
tool was not designed may create a hazard and cause per-
sonal injury.
u Do not convert this power tool to operate in a way
Power tool use and care
u Do not force the power tool. Use the correct power
which is not specifically designed and specified by the
tool manufacturer. Such a conversion may result in a
loss of control and cause serious personal injury.
u Do not use accessories which are not specifically de-
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
signed and specified by the tool manufacturer. Just
1 609 92A 765 | (17.03.2022)
Bosch Power Tools