Текст страницы
English | 21
u Remove the application tools before transporting the
Product features
power tool. This will allow you to avoid damage.
u Bonded cutting and grinding discs have an expiration
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Unlocking lever for protective guard
(2)
Direction of rotation arrow on housing
(3)
Lever
(4)
On/off switch
(5)
Standard auxiliary handle (insulated gripping sur-
face)
(6)
Low-vibration auxiliary handle (insulated gripping
surface)a)
date, after which the discs must no longer be used.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
(7)
Protective guard for grinding
(8)
Protective guard for cuttinga)
(9)
X-LOCK grinding disc/flap disca)
(10) X-LOCK disc brusha)
Product Description and
Specifications
(11) Cover for cutting
(12) X-LOCK cutting disca)
(13) X-LOCK diamond cutting disca)
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
(14) Handle (insulated gripping surface)
(15) X-LOCK holder
(16) Hand guarda)
(17) X-LOCK backing pad for fibre discsa)
Intended use
(18) X-LOCK fibre disca)
(19) X-LOCK clip for fibre discsa)
(20) X-LOCK cup brusha)
(21) X-LOCK conical brusha)
(22) X-LOCK diamond core cuttera)
(23) Extraction guard for cutting with cutting guidesa)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
The power tool is intended for cutting and brushing metal,
stone, plastic and composite materials, roughing metal,
plastic and composite materials as well as making holes in
stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used (see "Operation", page 25).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.
Technical Data
Angle grinder
GWX 10-125
GWX 14-125
Article number
3 601 GB3 0..
3 601 GB7 0..
Rated power input
W
1000
1400
Power output
W
630
820
Rated speedA)
min-1
11,000
11,000
mm
125
125
Max. grinding disc diameter/rubber sanding
pad diameter
Restart protection
●
●
Soft start
●
●
Constant electronic control
−
●
Weight according to EPTA-Proced-
ure 01:2014B)
kg
2.2–2.5
2.2–2.5
Bosch Power Tools
1 609 92A 765 | (17.03.2022)