Инструкция газовая варочная поверхность Indesit THPM 642 WS/WH/I

4.4 Installing the product (стр. 21 из 96)

Бренд: Indesit

Страница 21 документа Газовая варочная поверхность Indesit THPM 642 WS/WH/I. Раздел: Варочные панели газовые. Бренд: Indesit.

Текст страницы

EN

• The gas connection must be made via a
gas hose or a fixed connection.

RU

• If there is gas leak, shut off the gas sup-
ply and ventilate the room.
• Never use a match or lighter to make the
gas leakage control.

Connection with clamped (threadless) gas
hose

KK

4.4 Installing the product

1. Place the new seal in the connection

1. Remove burners, burner caps and grills

piece for liquid gas and make sure the
seal is seated correctly.

on the hob from the product.

2. Secure the gas connection outlet of the

2. Turning the hob upside down, place it on

a flat surface.

3. In order to avoid the foreign substances

product with a 22 mm spanner, connect
the connecting piece to the gas outlet of
the product with a 24 mm spanner and
tighten securely.

and liquids penetrate between the hob
and the counter, please apply the putty
supplied in the package on the contours
of the lower housing of the hob but
make sure that the putty does not over-
lap.

4. Fill the corners by forming bends at the

3. Fit the mounting clamp to one end of

corners as illustrated in the figure. Form
as much bend as required to fill the gap
in the corners.

the gas hose. Soften the end of the gas
hose to which you have attached the
clamp by placing it in boiling water for
one minute.

4. Insert the softened gas hose all the way

into the connection piece. Tighten the
clamp securely with a screwdriver.

Make sure that the skirting sections
on the lower housing of the hob are
filled with putty.

5. Place the hob on the counter and align

it.

5. You must check for leakage of the con-

6. Using the installation clamps secure the

nection part after connection.

hob by fitting through the holes on the
lower casing.

1
Hob

2
Screw

3
Installation clamp

Leakage check at the connection point
• Make sure that all knobs on the product
are turned off. Make sure that the gas
supply is open. Prepare soapy foam and
apply it onto the connection point of the
hose for gas leakage control.
• Soapy part will froth if there is a gas leak-
age. In this case, inspect the gas connec-
tion once again.
• Instead of soap, you can use commer-
cially available sprays for gas leak check.

EN / 21

Оглавление

Русский 32
Бытовая техника / Встраиваемая техника / Варочные панели / Варочные панели газовые

DEXP 30-KB1, 45-KB01, 45-KB02SS, 60-KB01

32 стр.
Бытовая техника / Встраиваемая техника / Варочные панели / Варочные панели газовые

DEXP 30-KB1, 45-KB01, 45-KB02SS, 60-KB01

32 стр.
Бытовая техника / Встраиваемая техника / Варочные панели / Варочные панели газовые

DEXP 30-KB1, 45-KB01, 45-KB02SS, 60-KB01

32 стр.
Бытовая техника / Встраиваемая техника / Варочные панели / Варочные панели газовые

DEXP 30-KB1, 45-KB01, 45-KB02SS, 60-KB01

32 стр.
Бытовая техника / Встраиваемая техника / Варочные панели / Варочные панели газовые

DEXP 9M2GT ST

24 стр.