Текст страницы
EN
mended by the authorized service, espe-
cially for persistent stains on enamelled
burner caps.
RU
8. Do not contact burner caps with ag-
KK
gressive detergents such as oven in-
terior cleaning agents, descalers while
cleaning them, this may cause discol-
ouration.
9. Clean the pot holders with detergent wa-
ter and non-scratching, soft brush after
each operation and then dry them.
Plastic parts and painted surfaces
• Clean plastic parts and painted surfaces
using dishwashing detergent, warm wa-
ter and a soft cloth or sponge and dry
them with a dry cloth.
• Do not use hard metal scrapers and ab-
rasive cleaners. They may damage the
surfaces.
• Ensure that the joints of the components
of the product are not left damp and with
detergent. Otherwise, corrosion may oc-
cur on these joints.
10.When the burner caps and pot holders
8.2 Cleaning the hob
Cleaning the gas burners
are used as wet, persistent lime stains
may occur as a result of the heat. En-
sure that it is dried before operation.
1. Before cleaning the hob, remove pot
11.Place burner heads, caps and pot hold-
holders, burner caps and heads from the
hob.
ers respectively.
2. Clean the surface of the hob as per the
12.When placing the pot holders, ensure
that they centre the burners. In pin mod-
els, fit the pins on the burner plate to the
pin slots on the pot holders.
recommendations included in the gen-
eral cleaning information according to
the surface type (enamelled, glass, inox,
etc.).
3. Clean the burner chamber with a cloth
soaked in detergent or with non-scratch-
ing, soft brush. Ensure that no food re-
mains are left.
4. Clean the spark plugs and thermal ele-
ments (in models with ignition and
thermal element) with a well squeezed
cloth. Then dry with a clean cloth. Pay
attention that the spark plug and the
thermal element are completely dry.
5. Clean the burner caps and heads with
Assembling the burner parts
1. Place the parts as in the figure after
detergent water after each operation
and then dry them.
cleaning the burners.
6. For persistent stains, keep burner caps
2. Place the burner head ensuring that it
and heads in detergent water or warm
soapy water at least for 15 minutes.
Clean with a non-metallic and non-
scratching brush.
passes through the burner spark plug
(4). Turn the burner head right and left
to make sure that it is seated in the
burner chamber.
7. You may use the Quick&Shine cleaning
3. Place the burner cap on the burner
head.
agents for the oven interiors and grills,
used on enamelled surfaces and recom-
EN / 29