Текст страницы
5.5 Automatic Heat Up
To see the remaining time: touch
to set
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To change the time: touch
to set the
Activate this function to get a desired heat
setting in a shorter time. When it is on, the
zone operates on the highest setting in the
beginning and then continues to cook at the
desired heating setting.
cooking zone. Touch
or
.
To activate the function the
cooking zone must be cold.
To deactivate the function: touch
to set
To activate the function for a cooking
the cooking zone and then touch
. The
remaining time counts down to 00. The
indicator of the cooking zone disappears.
zone: touch
(
comes on). Immediately
touch a desired heat setting. After 3 seconds
comes on.
When the countdown ends, an
acoustic signal sounds and 00
flashes. The cooking zone
deactivates.
To deactivate the function: change the
heat setting.
5.6 PowerBoost
To stop the sound: touch
.
•
CountUp Timer
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
This function makes more power available to
the induction cooking zones. The function
can be activated for the induction cooking
zone only for a limited period of time. After
this time the induction cooking zone
automatically sets back to the highest heat
setting.
To activate the function: touch
of the
Refer to “Technical data”
chapter.
timer.
appears. When the indicator of the
cooking zone starts to flash, the time counts
To activate the function for a cooking
zone: touch
.
comes on.
up. The display switches between
and the
counted time (in minutes).
To see how long the cooking zone
To deactivate the function: change the
heat setting.
5.7 Timer
operates: touch
to set the cooking zone.
The indicator of the cooking zone starts to
flash. The display shows how long the zone
operates.
•
Count Down Timer
You can use this function to set the length of
a single cooking session.
To deactivate the function: touch
and
then touch
or
. The indicator of the
cooking zone disappears.
First set the heat setting for the cooking
zone, then set the function.
•
Minute Minder
You can use this function when the hob is
activated and the cooking zones do not
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
operate. The heat setting display shows
.
To activate the function: touch
and then
To activate the function: touch
of the
timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to
flash, the time counts down.
touch
or
of the timer to set the time.
When the time finishes, an acoustic signal
sounds and 00 flashes.
ENGLISH
11