Текст страницы
Other remotely controlled
appliances may block the signal.
Do not use any such appliances
near to the hob while Hob²Hood
is on.
Cooker hoods with the Hob²Hood function
To find the full range of cooker hoods which
work with this function refer to our consumer
website. The Electrolux cooker hoods that
work with this function must have the symbol
.
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 General information
•
Clean the hob after each use.
•
Always use cookware with a clean base.
•
Scratches or dark stains on the surface
have no effect on how the hob operates.
•
Use a special cleaner suitable for the
surface of the hob.
•
Use a special scraper for the glass.
otherwise, the dirt can cause damage to
the hob. Take care to avoid burns. Use a
special hob scraper on the glass surface
at an acute angle and move the blade on
the surface.
•
Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration. Clean
the hob with a moist cloth and a non-
abrasive detergent. After cleaning, wipe
the hob dry with a soft cloth.
•
Remove shiny metallic discoloration:
use a solution of water with vinegar and
clean the glass surface with a cloth.
7.2 Cleaning the hob
•
Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate or operate
the hob.
Check if the hob is correctly connected
to the electrical supply.
The hob is not connected to an elec‐
trical supply or it is connected incor‐
rectly.
16
ENGLISH