Текст страницы
2. All operating cooking zones will operate
5. Confirm the setting by touching the
EN
at minimum level (level 1)
key and turn off the hob. Total power
value you have set shall be activated.
RU
symbol will
appear on the display of the active cook-
ing zones.
KK
3. Touch the
key again to reoperate all
cooking zones with their previous set-
tings.
The temperature levels you may as-
sign to the hobs may vary as per
the total power level set. The tem-
perature level provided to the hob
be reduced automatically as per the
power setting to be performed by
the hob. This is not an error.
Power management function
Your appliance is equipped with a power
management function. You may change the
total power that may be drawn by the hob
with this function. There are 8 levels avail-
able for the power management function.
Power management function - Total power
levels that may be set
Power management display indicator
If a key other than the specified se-
quence is touched while changing
the power level, the setting cannot
be made. You have to repeat the
steps from the beginning to make
the setting.
Total power
25
2,5 kW
30
3 kW
36
3,6 kW
44
4,4 kW
54
5,4 kW
57
5,7 kW
67
6,7 kW
72
7,2 kW
To change the total power;
1. Turn the hob on by touching the
Using induction cooking zones safely and
efficiently
Operating principles: Induction hob directly
heats the cooking vessel as a matter of
principle. Therefore, it has a lot of advant-
ages as compared with other hob types. It
operates more efficiently and the hob sur-
face is colder.
Your induction hob is equipped with super-
ior safety systems that will provide you
maximum safe usage.
key.
Turn off the hob on by touching the
again.
2. Then touch respectively the
key of
the right front zone, the
key, the timer
key, the timer
key, and finally the
left front zone
key.
Your hob can be equipped with in-
duction cooking zones with a dia-
meter of 145, 180, 210 and 280 mm
depending on the model. Each
cooking zone automatically detects
the vessel placed on it thanks to
the induction feature. Energy is
generated only where the vessel
comes into contact with the cook-
ing zone and thus, minimum energy
consumption is achieved.
3. The power management level set is dis-
played on the timer display.
4. Touch the
The product might start-stop when
it is operating on levels from 1 to 7,
especially with cookware with a
small diameter and when water-oil
is little. This is not a fault.
key to switch between
levels and set the total power value you
want to set.
EN / 19