Текст страницы
Operation Manual
Figure 6-9 Day/night
Step 2
Configure day and night parameters.
Table 6-6 Description of day and night parameters
Parameter
Description
You can select device display mode from Color , Auto, and B/W.
●Color : The system displays color image.
●Auto : The system switches between color and black-and-white
display according to the actual condition.
●B/W : The system displays black-and-white image.
Mode
●Day/Night configuration is independent from profile management
configuration.
●For Triple-Sight Perimeter Protection Bullet WizMind Network
Camera, the mode of distant view channel will automatically
synchronize with the panorama and medium view channels. For
instance, if the distant view channel is set to B/W , the panorama and
medium view channels will also switch to B/W.
You can configure camera sensitivity when switching between color and
black-and-white mode. Hover over
to get detailed information.
Sensitivity
This configuration is available only when you set Auto in Mode.
This configuration is available only when you set Auto in Mode.
Delay
You can configure the delay when camera switching between color and
black-and-white mode. The lower the value is, the faster the camera
switches between color and black-and-white mode.
Step 3
Click Apply.
6.2.1.8 Illuminator
This configuration is available only when the device is equipped with illuminator. Procedure
Step 1
Select
> Camera > Image > Illuminator.
23