Текст страницы
Operation Manual
Parameter
Description
Enter maximum 63 characters in Chinese, English, and Arabic numerals.
●Click
to select title type, and you can set maximum 2 titles.
Subject
●Select Attachment, the system sends 1 image to the configured
Email by default.
You can select 3 Images, and then configure the interval. The
system sends 3 images according to the configured interval after the
alarm is triggered.
Attachment
Select the check box to support attachment in the email.
●Receiver’s email address. Supports 3 addresses at most.
Receiver
●After entering the receiver's email address, the Test button is
displayed. Click Test to test whether the emails can be sent and
received successfully.
The system sends test mail to check if the connection is successfully
Health Mail
configured. Click
and configure the Sending Interval, and then
the system sends test mails as the set interval.
Table 6-15 Description of major mailbox configuration
Mailbox
SMTP server
Authentication
Port
Description
Gmail
smtp.gmail.co
m
SSL
465
You need to enable SMTP service
in your mailbox.
TLS
587
Step 4
Click Apply.
6.3.6 UPnP
UPnP (Universal Plug and Play) is a protocol that establishes mapping relation between local area
and wide area networks. This function enables you to access local area device through wide area IP
address.
Prerequisites
●Make sure the UPnP service is installed in the system.
●Log in the router, and configure WAN IP address to set up internet connection.
●Enable UPnP in the router.
●Connect your device to the LAN port of the router.
●Select
> Network > TCP/IP, in IP Address , enter the local area IP address of the router or
select DHCP and acquires IP address automatically.
Procedure
Step 1
Select
> Network > UPnP.
54