Текст страницы
Operation Manual
6.2.1.11 Fisheye
Select installation mode and record mode according to the actual installation scene. When the
camera accesses the platform with corrective stream, the platform displays the corrective image.
This function is only available on fisheye device.
Procedure
Step 1
Select
> Camera > Image > Fisheye.
Figure 6-15 Fisheye
Step 2
Set installation mode and record mode.
Table 6-8 Description of fisheye parameters
Parameter
Description
installation Mode
You can select Ceiling , Wall, or Ground.
●1O: The original image before correction.
●1P: 360° rectangular panoramic image.
●2P: When the installation mode is Ceiling or Ground, you can set
this mode. Two associated 180° rectangular image screens; at any
time, the two screens form a 360° panoramic image.
●1R: Original image screen + independent sub-screen. You can
zoom or drag the image in all the screens.
Record Mode
●2R: Original image screen + two independent sub-screens. You can
zoom or drag the image in all the screens.
●4R: Original image screen + four independent sub-screens. You can
zoom or drag the image in all the screens.
●1O + 3R: Original image screen + three independent sub-screens.
You can zoom or drag the image in original image screen, and
move the image (upper and lower) in sub-screens to adjust the
vertical view.
Step 3
Click Apply.
6.2.2 Setting Encode Parameters
This section introduces video parameters, such as video, snapshot, overlay, ROI (region of interest),
and path.
27