Текст страницы
Operation Manual
●Click
to delete the server information.
4. Click Apply , and then close the Server Config page.
Step 3
In the Server drop-down list, select the configured server.
The system automatically displays the IP address and port, and then you can enter the
rest information as needed.
Figure 6-66 Select the server
Step 4
Click Apply.
6.5.1.3 Subscribing Alarm
6.5.1.3.1 Alarm Types
Table 6-23 Description of alarm types
Alarm Type
Description
Preparation
Motion Detection
The alarm is triggered when
moving object is detected.
Motion detection is enabled. For
details, see "6.5.3.1 Setting Motion
Detection".
Disk Full
The alarm is triggered when the
free space of SD card is less than
the configured value.
The SD card no space function is
enabled. For details, see "6.5.2.1
Setting SD Card Exception".
Disk Error
The alarm is triggered when there
is failure or malfunction in the SD
card.
SD card failure detection is enabled.
For details, see "6.5.2.1 Setting SD
Card Exception".
Video Tampering
The alarm is triggered when the
camera lens is covered or there is
defocus in video images.
Video tampering is enabled. For
details, see "6.5.3.2 Setting Video
Tampering".
External Alarm
The alarm is triggered when there
is external alarm input.
The device has alarm input port and
external alarm function is enabled.
For details, see "6.5.1.1 Setting
Alarm-in".
Audio Detection
The alarm is triggered when there
is audio connection problem.
Abnormal audio detection is
enabled. For details, see "6.5.4
Setting Audio Detection".
IVS
The alarm is triggered when
intelligent rule is triggered.
Enable IVS, crowd map, face
detection or people counting, and
other intelligent functions.
Scene Changing
The alarm is triggered when the
device monitoring scene changes.
Scene changing detection is
enabled. For details, see "6.5.3.3
Setting Scene Changing".
71