Текст страницы
Operation Manual
Figure 6-12 Time plan settings
Step 3
Select the mode.
●Manual : Adjust the brightness of illuminator manually, and then the system will
supply illuminator to the image accordingly.
Some models support illumination by area in this mode.
●Auto : The system adjusts the illuminator intensity according to the ambient lighting
condition.
●Zoom Priority : The system adjusts the illuminator intensity automatically according
to the change of the ambient light.
When the ambient light turns darker, the system turns on the low beam lights first,
if the brightness is still not enough, it turns on the high beam lights.
When the ambient light turns brighter, the system dims high beam lights until they
are off, and then the low beam lights.
When the focus reaches a defined wide angle, the system will not turn on high
beam light in order to avoid over-exposure in short distance. In the meantime, you
can configure light compensation manually to fine-tune IR light intensity.
●Off : Illuminator is off.
Step 4
(Optional) Configure Illumination Overexposure Remover.
Only some fill light modes support this function.
Step 5
Click Apply.
6.2.1.9 Defog
The image quality is compromised in foggy or hazy environment, and defog can be used to improve image clarity. Procedure
Step 1
Select
> Camera > Image > Defog.
25