Текст страницы
Operation Manual
Figure 6-34 Splice by distance
●Auto splicing
1. Click Start, the system starts to splice the image.
2. Wait for 3 minutes, the system displays the splicing results after splicing is
complete.
3. Check the result, and then click Apply. The splicing will take effect.
Figure 6-35 Auto splicing
6.2.4 Audio
You can configure audio parameters and alarm audio.
6.2.4.1 Setting Audio Parameters
This section introduces audio parameters, including encode mode, sampling frequency, audio in type, and noise filter. Procedure
Step 1
Select
> Camera > Audio.
43