Текст страницы
EVOLUTION LX QUICK SETUP
Each time a new print cartridge is installed the system automatically profiles the
correct operating parameters and current remaining ink level for the newly
installed cartridge. These parameters set the required voltage and firing
parameters to produce consistent results without user intervention.
NOTE: USING OTHER THAN AUTHORIZED CARTRIDGES MAY CAUSE
UNDESIRABLE RESULTS.
To view the current ink level press the following keys in order:
<< -- INK -- >> 100 % OTHER KEY EXIT
This screen indicates the ink level remaining.
This value is approximate as it does not take
into account any service wipes or external
priming/cleaning functions.
Press any key to return to the STOPPED mode.
The LINE SPEED may be set in either the PRINTING or STOPPED mode.
Set the line speed by:
The PRINT DELAY may be set in either the PRINTING or STOPPED mode.
Set the print delay by:
NOTE: Each increment or decrement changes the delay by the pre-defined
amount. Each count increases or decreases the print delay by approximately
0.050” (1.27mm)
You may continue to experiment with line speed and print delay until the desired
code registration on the product is achieved.
14
EVOLUTION LX SYSTEM MANUAL Issue 1.0 5 DEC 2009