Текст страницы
DATE OFFSET 1 DATE OFFSET 1 2 DATE OFFSET 2
DATE OFFSET USE KEYS 0->9 # OF DAYS = 0100
< - - SELECT - - > CODE 39
< - - SELECT - - > UPC A
3 = DATE OFFSET (LX1 WITH OP 3 ONLY OR LX 2)
This selection allows the user to preset the number of
days used in the date offset calculation to a maximum
of 9999 days. The format of the date offset can be
different than a normal date and may be set with the
F3 #3 option DATE FORMAT.
There are two date offset functions, and each may be
set independently.
Select option 1 or 2 to enter the desired offset days.
4 = BARCODE TYPE (LX 2 MODEL ONLY)
This parameter determines the barcode type to be
entered
into
a
message.
As
standard
the
EVOLUTION LX 2 contains 8 barcode symbologies,
which are: UPC-A, UPC-E, EAN-8, EAN-13, CODE
39, CODE 128B, CODE 128C AND INTERLEAVED
2 OF 5.
Press
or
to change the barcode type and
press
< - - SELECT - - > MIN. BAR WIDTH= 5
< - - SELECT - - > ADDED SPACE = 0
< - - SELECT - - > QUIETZONE WIDTH 75
once the desired type is displayed.
The default system parameter establishes that the
normal size of a narrow bar is equal to 5 vertical
columns. This value, which is variable from 3 to 15,
is selectable depending on the overall length of the
barcode to be printed and the bleed factor of the ink
on the surface. This value sets both the light and
dark bars nominal width.
The added space parameter allows the user to
insert extra columns to a normal light bar width to
allow for the bleed factors associated with various
substrates. Valid entries are from 0 to 3 extra
spaces.
The quiet zone is the space before and after a
barcode that must be kept blank. Each count is
equal to one vertical column. In proper aspect ratio
each column is 0.0033” thus a count of 75 would
leave 0.247” before and after the barcode.
10
EVOLUTION LX SYSTEM MANUAL Issue 1.0 5 DEC 2009