Инструкция компьютерное кресло Evolution LX 2

EVOLUTION LX MOUNTING OPTIONS
The EVOLUTION LX mounting bracket assembly C21010 has a number of
possible mounting configurations, which allows adaptability to a variety of
production equipment.
The
top
cross
slide
bracket C20741 may be
rotated
180
deg
by
loosening
the
included
setscrew
504JCS
and
rotating the bracket. This
allows the print head to be
extended by just over 1”.
Although this is not a
significant amount it might
be helpful.
Refer to the first two
pictorials to identify the
various components of the
mounting bracket system
C21005.
Rotating
the
horizontal
mounting bracket C20740
may
further
increase
extension
into
the
production
line.
The
mounting centers for both
the base block C20741
and
controller
holder
C20940-4 are identical.
Remove the two 502JHS
flat head screws from the
base block and the two
502JES
button
head
screws, rotate the bracket
and replace both the base
block
and
controller
holder.
The
above
procedure
allows for a print head
displacement from .625”
before the production line
to
11.450”
into
the
production line.

2
EVOLUTION LX SYSTEM MANUAL Issue 1.0 5 DEC 2009