Текст страницы
Pickup Roller
Feeding
Roller
Paper Jam Error(200302)
Printer Paper Jam(02): Load paper from main tray but fails to pick paper. Paper stuck in paper tray.
< User Check >
(1) Check if paper is correctly loaded into the paper tray.
(2) Open front cover and remove the drum unit to remove paper.
(3) Check if the paper has been removed.
Step
Cause
Solution
1
IFA99 &IF98 Cable not
connect well.
Reconnect the cable.
2
SB237 Cable not connect
well
Reconnect the cable.
3
Main motor cable looses.
Reconnect the cable.
4
Dirt on the pick up roller or
Separation Pad.
Clean pickup roller and pad.
5
Pickup clutch failed.
Replace clutch.
6
Paper-in sensor failed.
Replace feeding sensor.
7
Pickup roller clutch failed.
Replace the clutch.
8
Main motor failed.
Replace main motor.
9
IF98 board defective
Replace the IF98 board.
10
Main board defective
Replace the main board..
Pre-check: Check paper path and sensors (Refer to Sensor Setting information check).
Paper Jam Error(200324)
Printer Paper Jam(03) Load paper from main tray and paper jammed at feeding sensor.
< User Check >
(1) Open front cover and remove the drum unit to remove the jammed paper.
(2) Check paper path.
(3) Check if the light guide of the drum unit is contaminated.
Ste
Cause
Solution
p
1
Light guide of the drum
contaminated.
Clean the light guide.
2
Deskew sensor cable loosen. Re-plug the cable.
3
Deskew sensor board
malfunctioned.
Replace deskew sensor board.
4
IF98 board cable loosed.
Re-plug the cable.
Confidential
12