Инструкция принтер лазерный Катюша P130

TS


User Check
(1) Check the operating environment. High temperature and high
humidity or low temperature and low humidity conditions can
cause this problem.
(2) Replaced the Toner Cartridge with a new one.

1.3.2 Troubleshooting of Image Defect

Too light

Step
Cause
Solution

1
Toner low.
Replace the toner cartridge.

2
Transfer roller worn out
Replace the transfer roller.

3
Power Supply Board malfunctioned. Replace the Power Supply Board.

4
Main board malfunctioned.
Replace the main board..

TS


User Check
(1) Check the operating environment. High temperature and high
humidity or low temperature and low humidity conditions can
cause this problem.
(2) Toner cartridge may not have correctly installed.
(3) Replaced the Toner Cartridge with a new one.

■ Too Light (partly)

Step
Cause
Solution

1
Toner low.
Replace the toner cartridge.

2
Toner cartridge may not have
correctly installed.
Reinstall Toner Cartridge correctly.

■ White Vertical Line


User Check
(1)Clean corona wire of the Drum Unit.
(2)Clean LPH (Laser Printer Head) (for LPH model).
(3)Clean the dust or powder on the roller of the Drum Unit. Refer to
<Cleaning Method of the Drum Unit>.
(4)Check if there is trace on Toner Cartridge Roller.
TS

Step
Cause
Solution

1
Dust or powder on the charger. Clean the charger of the Drum unit.

2
Accumulated dust on the Drum
unit.
Clean the drum unit or replace the drum
unit with a new one. Refer to <Cleaning
Method of the Drum unit>

3
LSU CABLE malfunctioned.
Replace LSU CABLE.

Confidential
24