Инструкция пылесос Bosch BGL8POW2

Before using for the first time en

2. Set the required length of the tele-

scopic tube.
→ Fig. 8

Before using for the first time Before using for the first time

Prepare the appliance for use.

Switching on the appliance

1. Hold the mains plug and pull it out

Installing the appliance

1. Place the handle onto the the hose

to the required length.
2. Insert the mains plug into the

socket.
3. Press ⁠.

and lock it in place.
→ Fig. 3
2. Engage the hose adapter into the

→ Fig. 9

Switching off the appliance

air-intake opening in the lid.
→ Fig. 4
3. Connect the handle to the tele-

scopic tube.
4. Connect the telescopic tube to the

1. Press .
2. Unplug the mains plug.
3. Briefly pull on the mains cable and

then let go.
a The power cord retracts automatic-

floor nozzle.
→ Fig. 5
5. Place the accessory support 1 onto

ally.

Transporting the appliance

the telescopic tube.
→ Fig. 6
6. Place the crevice nozzle 1 from the

1. Switch off the appliance.
2. Stand the appliance upright on its

bottom onto the accessory support
1.
→ Fig. 6
7. Place the brush ring 1 onto the up-

end.
3. Slide the catch on the floor tool

holstery nozzle 1.
→ Fig. 7
8. Place the upholstery nozzle1 with

into the groove on the underside of
the vacuum cleaner.
→ Fig. 10
4. To overcome obstacles, transport

the appliance by the handle.

the brush ring 1 from above onto
the accessory holder 1.
→ Fig. 6

Controlling the power1

Basic operation Basic operation

You can control the setting continu-
ously.

1. Turn the power control to the re-

You can find out everything you need
to know about operating your appli-
ance here.

Setting the telescopic tube

quired setting.
→ "Overview of the controls",
Page 14
2. Turn the telescopic tube with air

1. Unlock the telescopic tube.

flow regulator to the required posi-
tion.
→ Fig. 11

1 Depending on the appliance specifications

15