Текст страницы
en Cleaning and servicing
Setting the floor tool
Cleaning and servicing Cleaning and servicing
▶Use the switch to set the floor
nozzle to the required base.
→ Fig. 12
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Motor protection
Overview of the floor nozzle
settings
Pay attention to dirt in the motor.
Here, you can find an overview of the
floor nozzle settings.
Symbol
Use
Vacuum rugs and carpets.
ATTENTION!
Dirt in the motor may damage the
motor.
▶Never operate the appliance
Vaccum parquet and hard floors.
without a dust bag.
▶Never operate the appliance
Vacuuming with accessory
without the motor protection filter.
▶Never operate the appliance
without the exhaust filter.
1. Place the required nozzle onto the
Cleaning products
telescopic tube or the handle.
2. After use, take the nozzle that is
Only use suitable cleaning products.
used from the telescopic tube or
remove from the handle.
Stopping and parking the ap-
pliance
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
▶Do not use harsh or abrasive de-
- Switch off the appliance.
- If you want to stop vacuuming for
tergents.
▶Do not use cleaning products with
a high alcohol content.
▶Do not use hard scouring pads or
cleaning sponges.
▶Wash sponge cloths thoroughly
longer use periods, use the stor-
age aid on the underside of the
appliance.
→ Fig. 10
3. Use the parking aid for shorter
before use.
programme pauses.
→ Fig. 13
Cleaning the motor protection
filter
Dismantling the appliance
1. Disconnect the connection
between the telescopic tube and
the handle.
→ Fig. 14
2. Push the two locking catches to-
Tip: To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter at regular inter-
vals. After vacuuming fine dust
particles, clean or replace the motor
protection filter in order to guarantee
the appliance's suction.
gether.
3. Pull the tube out of the appliance.
→ Fig. 15
1. Switch off the appliance.
16