Инструкция пылесос Bosch BGL8POW2

en Cleaning and servicing

1. Unplug the mains plug.
2. Open the rear flap.
3. Push the locking tab in the direc-

tion of the arrow.
5. Release the HEPA hygiene filter 1.
6. Remove the HEPA hygiene filter 1

from the appliance.
→ Fig. 19
7. Tap out the filter unit.
8. Wash out the filter unit under run-

ning water.
→ Fig. 22
9. Leave the HEPA hygiene filter 1 to

dry for at least 24 hours.
10.Insert the HEPA hygiene filter 1 into

the appliance.
11.Close the rear flap.

Changing the dust bag

If the dust bag change indicator
lights up continuously when the
nozzle is raised and at the highest
performance level, change the dust
bag.

1. Switch off the appliance.
2. Unplug the mains plug.
3. To open the lid, press the locking

lever.
4. To close the dust bag, pull the

locking tab.
5. Remove the full dust bag from the

holder.
→ Fig. 23
6. Dispose of the full dust bag.
7. Push the new dust bag into the

holder until it clicks into place.
→ Fig. 24
Do not kink the dust bag.
8. Close the lid.

Make sure that the dust bag is not
pinched when the lid is closed.
The lid only closes if a dust bag
has been inserted.

1 Depending on the appliance specifications

18