Инструкция пылесос Bosch BGL8POW2

Cleaning and servicing en

1. Unplug the mains plug.
2. Open the lid.

1. Unlock the filter holder.
2. Remove the foam filter 1 and the

→ Fig. 16
4. In order to release the motor pro-

Micro-Hygiene exhaust filter 1 from
the filter holder.
→ Fig. 20
7. Tap out the foam filter 1 and the

tection filter from the catch mech-
anism, pull on the side tabs.
→ Fig. 17
5. Remove the motor protection filter

Micro-Hygiene exhaust filter 1.
8. If it is very dirty, wash the foam fil-

in the direction of the arrow.
6. Tap out the motor protection filter.
7. If the motor protection filter is very

ter 1 and the Micro-Hygiene ex-
haust filter 1.
→ Fig. 21
9. Leave the foam filter 1 and the Mi-

dirty, rinse it.
→ Fig. 18
8. The filter must then be left to dry

cro-Hygiene exhaust filter 1 to dry
for at least 24 hours.
10.Insert the foam filter 1 and the Mi-

for at least 24 hours.
9. Care for the appliance and the ac-

cro-Hygiene exhaust filter 1 into the
filter holder.
11.Insert the filter holder into the ap-

cessory parts with a standard com-
mercially available plastic cleaner.
10.If required, vacuum the dust com-

pliance.
12.Close the rear flap.

partment using a second appli-
ance or clean it with a dry duster
or dusting brush.
11.After cleaning, refit the motor pro-

Cleaning the HEPA hygiene
filter1

tection filter into the appliance.
12.Lock the motor protection filter into

place at the top.
13.Close the lid.

Note: The filtering action of the filter
remains intact, even if the filter sur-
face becomes discoloured.
Tips
¡ For optimum performance level,

clean the HEPA hygiene filter 1

Cleaning the Micro-Hygiene
exhaust filter 1

once a year.
After vacuuming fine dust particles,
clean the HEPA hygiene filter 1 in
order to guarantee the appliance's
suction performance.
¡ To clean the filter unit thoroughly,

Tip: To achieve the best possible va-
cuuming results, clean or replace the
Micro-Hygiene exhaust filter 1 once a
year. After vacuuming fine dust
particles, clean or replace the Micro-
Hygiene exhaust filter 1 in order to
guarantee the appliance's suction.

1. Switch off the appliance.
2. Unplug the mains plug.
3. Open the rear flap.
4. Push the locking tab in the direc-

you can clean the filter unit in the
washing machine. To protect the
rest of the laundry, put the filter
unit into a laundry bag. Wash the
filter unit at 30 °C using a gentle
programme and the lowest spin
speed.

1. Switch off the appliance.

tion of the arrow.
→ Fig. 19

1 Depending on the appliance specifications

17