Текст страницы
en Troubleshooting
Fault
Cause and troubleshooting
flashes.
Voltage under-usage may cause extension of a pro-
gramme.
No remedial action possible.
lights up.
Voltage under-usage may cause extension of a pro-
gramme.
No remedial action possible.
lights up.
The temperature is too high.
▶Wait until the temperature has dropped.
▶Cancel the programme.
→ "Cancelling the programme", Page 29
Water level is too high.
▶Select a suitable programme for draining.
→ "Programmes", Page 23
flashes.
Door is not closed.
▶Close the door.
Laundry is caught in the door.
▶Remove any trapped laundry.
"E:30/-20"
Detergent dosage is too high.
▶Reduce the amount of detergent for the next wash-
ing cycle with the same load.
Additional water is added.
▶Do not add any extra water to the appliance while it
is operating.
Solenoid valve defective.
▶Call the after-sales service.
→ "Customer Service", Page 44
All other error codes.
Malfunction
1. Switch the appliance off and then on again.
2. If the message appears again, disconnect the appli-
ance from the power supply for at least 30 seconds
by pulling out the plug or by switching off the relev-
ant circuit breaker in the fuse box.
a If the fault was a one-off, the message disappears.
3. If the message appears again, call the after-sales
service. Please specify the exact error message
when calling.
→ "Customer Service", Page 44
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
36