Текст страницы
Troubleshooting en
Fault
Cause and troubleshooting
The spin cycle runs
several times.
Appliance is not correctly aligned.
Align the appliance.
Page 14
The appliance feet are not fixed.
Not a fault. The appliance eliminates an imbalance by
repeatedly redistributing the laundry.
No action required.
The appliance is vi-
brating, 'wandering'
and making loud
noises during the spin
cycle.
Secure the appliance's feet.
Page 14
Transit bolts have not been removed.
Easy Iron is activated.
Remove the transit bolts.
High spin speed not
reached.
Select a programme that is suitable for the type of
fabric.
Page 21
The appliance is using a reduced spin speed to elimin-
ate an imbalance.
No action required.
The programme dura-
tion changes during
the wash cycle.
Not a fault. The programme sequence is optimised
electronically, another rinse cycle is switched on due to
heavy foam build-up, or an imbalance is eliminated.
No action required.
Whooshing, hissing or
sucking noises.
A foreign object is in the drain pump.
Clean the drain pump.
Page 33
Not a fault. Water is pumped in or detergent solution is
pumped out.
No action required.
Banging noises, rat-
tling in the drain
pump.
Detergents may contain water-insoluble substances
that deposit on the laundry.
There are detergent
residues on the laun-
dry.
Start the
Rinse . programme or brush out the
laundry after drying.
Damp stains have
formed on the fabrics
after the Steam pro-
gramme has ended.
Water droplets from the drum or from the door have
moistened the fabrics. The drops come from either
condensed steam or the residual moisture from the
previous wash programme.
A low spin speed is selected.
Iron the fabrics or hang them up to dry.
The laundry is too wet
after the spinning
cycle.
Start the Spin . programme.
The next time you run a wash cycle, set a higher
spin speed.
The appliance is using a reduced spin speed to elimin-
ate an imbalance.
1. Redistribute the laundry in the drum.
39