Текст страницы
Default
Default
Number
Description
The calling number corresponding to each linkage plan; supports number
expressions identical to the receive number rules
Options
123; 1xx; 1.; 1[3,5,7,8]xxxxxxxxx; 5753[5-6]xxxx
X represents a match for any single digit;
. represents a match for any single digit;
[] represents matching rules for a specific digit.
Default
None
Type
Description
Types of time periods for rule triggering execution
Options
Early: Triggered and executed before call establishment.
Connected: Triggered and executed after call establishment.
Direction
Description
The corresponding behavior handling for the configured rule
Options
Both: Triggered for both incoming and outgoing calls simultaneously;
Outgoing: Triggered for outgoing calls only;
Incoming: Triggered for incoming calls only.
Default
Both
Line
Description
The selected rule corresponds to the matched SIP line
Options
Auto,SIP1~SIP4
Default
Auto
MCAST Codec
Description
The multicast encoding sent when the multicast conversion rule is triggered
Options
PCMU,PCMA,G726-16,G726-24,G726-32,G726-40,G.729,G.729A,G.729B,
G.729AB,G723,iLBC,AMR,opus,G722
Note: The supported encodings may vary depending on the model, and the phone
encoding used in practice should prevail.”
Default
PCMU
URL
Description
When triggered by the default and conversion multicast rules, execute the URL.
Options
It supports HTTP/HTTPS/RTSP and multicast address and port.
1. When set to Default, it supports sending Action URL, as well as configuring the
RTSP video stream, multicast address, and port.
When triggered by the conversion multicast rule, it supports configuring the
multicast address and port. The configuration formats are:
For Default action selection, the configuration format is: “mcast://multicast
104
/
135