Инструкция телефон VoIP Fanvil V62

address:port”.

For
Conversion
Multicast
action
selection,
the
configuration
format
is:

“mcast://multicast address:port”."

Default
None

12.9 Line >> Basic Settings

Set up the register global configuration.

Table 24 - Set the line global configuration on the web page

Parameters
Description

STUN Settings

STUN NAT Traversal
Display whether STUN penetration is successful.

Server Address
Set the STUN server address

Server Port
Set the STUN server port, default is 3478

Set the STUN binding period which can be used to keep the NAT pinhole

STUN valid time

opened.

SIP Waiting Time
Set the timeout of STUN binding before sending SIP messages

SIP P2P Settings

Enable
Auto

Turn on Auto Answering.

Answering

After the set time has elapsed, the device automatically answers the

Auto Answering Delay

incoming call.

DTMF Type
Set the DTMF type.

DTMF SIP INFO Mode
Set the expression of #/* when SIP INFO is used as DTMF Send Type.

Use VPN
Turn on VPN.

Call-ID Format
Set the format of the SIP message Call-ID field, which is $id@$ip by default

12.10 Line >> RTCP-XR

RTCP-XR mode is based on RFC3611 (RTP Control Extended Report), which can measure and evaluate

network packet loss, delay and voice quality by sending RTCP-XR packets.

Table 25 - VQ RTCP-XR Settings

Parameters
Description

VQ RTCP-XR Settings

VQ RTCP-XR Session Report
VQ report on whether session mode is enabled or not.

VQ RTCP-XR Interval Report
Whether to turn on Interval mode for VQ report sending.

105
/
135