Текст страницы
ongoing calls)
$remote_number
Remote number in the call (effective during incoming, outgoing,
ongoing, and missed calls)
$remote_displayname
Display name of the remote number in the call (effective during
incoming, outgoing, and ongoing calls)
Note:
1) Effective only during incoming calls means that the variable will be replaced with the corresponding information
only when the variable is filled in the Incoming call options.
2) Effective only during outgoing calls means that the variable will be replaced with the corresponding information
only when the variable is filled in the Outgoing call options.
3) Effective only during ongoing calls means that the variable will be replaced with the corresponding information
only when the variable is filled in options related to calls such as Call established, Call terminated, Transfer call, Blind
transfer call, Attended transfer call, Hold, Unhold, Mute, Unmute, etc.
12.15 Phone settings >> Time/Date
The user can configure the time Settings of the phone on this page.
Table 31 - Time&Date settings
Parameters
Description
Network Time Server Settings
Time Synchronized via SNTP
Enable time-sync through SNTP protocol
Time Synchronized via DHCP
Enable time-sync through DHCP protocol
Time Synchronized via DHCPv6
Enable time-sync through DHCPv6 protocol
Primary Time Server
Set primary time server address
Set secondary time server address, when primary server is not
Secondary Time Server
reachable, the device will try to connect to secondary time server to
get time synchronization.
Time Zone
Select the time zone
Resync Period
Time of re-synchronization with time server
12-Hour Clock
Set the time display in 12-hour mode
Time/Date Format
12-hour clock
Set the time display in 12-hour mode
Time/Date Format
Select the time/date display format
Daylight Saving Time Settings
Choose your local, phone will set daylight saving time automatically
Local
based on the local
116
/
135