Инструкция телефон VoIP Fanvil V62

Enable Intercom Barge by selecting it, the phone auto answers the intercom call

Enable Intercom

during a call. If the current call is intercom call, the phone will reject the second

Barge

intercom call

9.6 MCAST

This feature allows user to make some kind of broadcast call to people who are in multicast group. User can

configure a multicast DSS Key on the phone, which allows user to send a Real Time Transport Protocol (RTP)

stream to the pre-configured multicast address without involving SIP signaling. You can also configure the

phone to receive an RTP stream from pre-configured multicast listening address without involving SIP

signaling. You can specify up to 10 multicast listening addresses.

Picture 71 - Multicast Settings Page

Table 12 - MCAST Parameters on Web

Parameters
Description

MCAST Send DTMF Mode
Set the DTMF mode sent by MCAST

Priority
Define the priority of the active call, 1 is the highest priority, 10 is the lowest.

The voice call in progress shall take precedence over all incoming paging

Enable Page Priority

calls.

Enable Prio Chan
Set the priority to enable multicast listening on the current channel

The multicast of each channel is not affected by the order, and other

Enable Emer Chan

multicasts can be interrupted at will

58
/
135