Инструкция телефон VoIP Fanvil V62

answers the call, other phone sets stop ringing. The call can be answered by only one phone set. When B or

C initiates a call, the SIP number registered by phone set A is the calling number.

To set a SIP hotspot, register at least one SIP account.

Picture 80 - Register SIP account

Table 14 - SIP hotspot Parameters

Parameters
Description

If your phone is set to “SIP hotspot server”, Device Table will display as Client

Device Table

Device Table which connected to your phone.
If your phone is set to “SIP hotspot client”, Device Table will display as Server
Device Table which you can connect to.

SIP hotspot
Enable hotspot
Set it to be Enable to enable the feature.

Mode
Choose hotspot, phone will be a “SIP hotspot server”; Choose Client, phone will be
a “SIP hotspot Client”

Monitor Type

Either the Multicast or Broadcast is ok. If you want to limit the broadcast packets,
you’d better use broadcast. But, if client choose broadcast, the SIP hotspot phone
must be broadcast.

Monitor Address
The address of broadcast, hotspot server and hotspot client must be same.
Remote Port
Type the Remote port number.

Configure SIP hotspot server:

64
/
135