Инструкция принтер лазерный Катюша P130

LS (стр. 40 из 84)

Бренд: P130

Страница 40 документа Принтер лазерный Катюша P130. Раздел: Лазерные принтеры. Бренд: P130.

Карточка инструкции Категория Бренд
Страница 40 из 84
Открыть на весь экран Открыть PDF

Текст страницы

<Drum unit cleaning method>:
• Take the toner cartridge out of the drum unit. Place a print sample in front of the drum unit to
locate image defects.

A mm

A mm

A mm

A mm

图 1
<Example of Image Defects>, A: Refer to < The Spacing of Various Rollers in the Image >Table
White specks with Amm length appear in all black pages.
Black specks with Amm length appear in all white pages.

Notice:

  • Do not use pointed objects such as ballpoint pens to clean the surface of the roller.
  • Clean with a half-mixed solution of ethanol and pure water.


User Check
(1) The problem could be disappeared after printing a few pages.
(2) Replace a new drum unit.

LS

■ A White Horizontal Line

Step
Cause
Solution

1
The ground spring of the Drum unit
defective.
Replace the drum unit.

2
Developing unit has been stored
for a long time.
The problem may be disappeared after printing a
few pages or try to clean the surface of the OPC
of the drum unit.

Confidential
31

Оглавление

Chapter 1 Theory of Operation and Product Structure 5
1.1 Product Overview 5
1.1.1 Paper pickup and feeding system 5
1.1.2 Paper pickup and feeding system including 3 areas 6
1.1.3 Duplex Unit 6
1.1.4 Parts and its functions 7
1.1.5 PCBA Connection Drawing 8
1.1.6 Location of Sensors 9
1.1.7 The Printing Process 14
1.2 Troubleshooting of Error Codes 18
1.2.1 Preparation 18
1.2.2 Error Causes and Solution 20
1.3 Troubleshooting of Image Problems 32
1.3.1 Illustration of Image Problems 32
1.3.2 Troubleshooting of Image Defect 33
Electrode on the drum unit 45
Chapter 2 Disassembling and Reassembling 46
2.1 Preparation 46
2.2 Disassembling Tools 47
2.2.1 Maintenance Tool List 47
2.2.2 Tighting torque List 48
2.2.3 Lubricants 49
2.3 Disconnecting Cables Before Disassembling 50
2.4 Basic Disassembling 51
2.4.1 Paper Tray 51
2.4.2 Front Cover 51
2.4.3 Left Cover 52
2.4.4 Right Cover 53
2.4.5 Top Cover 53
2.4.6 Duplex Unit 54
2.4.7 Drum Unit 55
2.5 Advanced Disassembling 55
2.5.1 Fuser 55
2.5.2 Control Panel 56
2.5.3 IF98 Board 57
2.5.4 IFA99 Board 58
2.5.5 Main Board 59
2.5.6 Power Supply Board 60
2.5.7 Exit Path 61
2.5.8 Exit Sensor 61
2.5.9 Registration Sensor 62
2.5.10 Deskew Sensor 63
2.5.11 Paper-in Sensor 63
2.5.12 Front Cover Open Sensor 64
2.5.13 Rear Cover Open Sensor 65
2.5.14 Fuser Out Sensor 66
2.5.15 Fuser Out Sensor Lever 67
2.5.16 Paper-in Sensor (Manual Tray) 67
2.5.17 Puser-Out Path 68
2.5.18 Duplex Sensor 68
2.5.19 Paper-Empty Sensor 70
2.5.20 Main Motor 70
2.5.21 Exit Motor 71
2.5.22 Main Fan 71
2.5.23 Pick-Up Clutch 71
2.5.24 Deskew Clutch 72
2.5.25 Pick-Up Clutch (Manual Tray) 72
2.5.26 Manual Tray Pad 72
2.5.27 Main Tray Pad 73
2.5.28 Rear Cover 74
2.5.29 Rear Fab 74
2.5.30 LPH (for model with LPH) 75
2.5.31 LSU (for model with LSU) 76
2.5.32 Drum Contact Spring 77
2.5.33 Check the Network Port 77
Chapter 3 Adjustment and Renew Settings after Replacement 78
3.1 Main Board Replacement 78
3.1.1 Adjustment after Replacement 78
3.1.2 Preparation 78
Chapter 4 Care and Maintenance 79
4.1 Notice before maintenance 79
4.2 Preparation before Replacement 80
4.4 Regular Cleaning 82
4.4.1 Cleaning the Inside of the Printer 82
4.4.2 Cleaning the Corona Wire 83
Appendix 1: Installing the printer driver 1
Appendix 2: AM3XTEST – The tool to find log 1
Appendix 3: Check the printing quality via PrintTest Tool 1

Похожие документы

Похожие документы по той же теме
Офис и мебель / Техника для печати / Лазерные принтеры

Принтер Deli P3100DN

70 стр.
Офис и мебель / Техника для печати / Лазерные принтеры

Принтер Deli P3100DN

70 стр.