Инструкция принтер лазерный Катюша P130

LS LS LS (стр. 42 из 84)

Бренд: P130

Страница 42 документа Принтер лазерный Катюша P130. Раздел: Лазерные принтеры. Бренд: P130.

Карточка инструкции Категория Бренд
Страница 42 из 84
Открыть на весь экран Открыть PDF

Текст страницы

5
Transfer roller did not rotate
well.
Replace the transfer roller.


User Check
(1) Check the environment. High or low temperature/humidity may
cause the problem.
(2) Replace drum unit.

LS LS LS

Step
Cause
Solution

1
Poor contact of toner cartridge
Replace the toner cartridge.

2
Power Supply Board
malfunctioned.
Replace the Power Supply Board.

3
Transfer roller did not rotate well. Replace the transfer roller.

 Ghost (2)

Important:

Periodic image defects may be caused by defects of various rollers. Please refer to
the table below to determine the cause of the defect based on the diameter of various
rollers or the spacing in the image.

Refer to < The Spacing of Various Rollers in the Image >Table
<The Spacing of Various Rollers in the Image >
Component name
Spacing in the Image

Developing Roller(DR)
33mm

Drum Unit(OPC)
75mm


User Check
(1) Check if proper paper type has been selected
in printer driver.

Heating Roller(HR)
63.5mm

Poor Positioning

Step
Cause
Solution

1
Registration sensor jumped.
Replace the registration sensor.

2
Main board malfunctioned
(NVRAM data error)
Replace the main board.

Confidential
33

Оглавление

Chapter 1 Theory of Operation and Product Structure 5
1.1 Product Overview 5
1.1.1 Paper pickup and feeding system 5
1.1.2 Paper pickup and feeding system including 3 areas 6
1.1.3 Duplex Unit 6
1.1.4 Parts and its functions 7
1.1.5 PCBA Connection Drawing 8
1.1.6 Location of Sensors 9
1.1.7 The Printing Process 14
1.2 Troubleshooting of Error Codes 18
1.2.1 Preparation 18
1.2.2 Error Causes and Solution 20
1.3 Troubleshooting of Image Problems 32
1.3.1 Illustration of Image Problems 32
1.3.2 Troubleshooting of Image Defect 33
Electrode on the drum unit 45
Chapter 2 Disassembling and Reassembling 46
2.1 Preparation 46
2.2 Disassembling Tools 47
2.2.1 Maintenance Tool List 47
2.2.2 Tighting torque List 48
2.2.3 Lubricants 49
2.3 Disconnecting Cables Before Disassembling 50
2.4 Basic Disassembling 51
2.4.1 Paper Tray 51
2.4.2 Front Cover 51
2.4.3 Left Cover 52
2.4.4 Right Cover 53
2.4.5 Top Cover 53
2.4.6 Duplex Unit 54
2.4.7 Drum Unit 55
2.5 Advanced Disassembling 55
2.5.1 Fuser 55
2.5.2 Control Panel 56
2.5.3 IF98 Board 57
2.5.4 IFA99 Board 58
2.5.5 Main Board 59
2.5.6 Power Supply Board 60
2.5.7 Exit Path 61
2.5.8 Exit Sensor 61
2.5.9 Registration Sensor 62
2.5.10 Deskew Sensor 63
2.5.11 Paper-in Sensor 63
2.5.12 Front Cover Open Sensor 64
2.5.13 Rear Cover Open Sensor 65
2.5.14 Fuser Out Sensor 66
2.5.15 Fuser Out Sensor Lever 67
2.5.16 Paper-in Sensor (Manual Tray) 67
2.5.17 Puser-Out Path 68
2.5.18 Duplex Sensor 68
2.5.19 Paper-Empty Sensor 70
2.5.20 Main Motor 70
2.5.21 Exit Motor 71
2.5.22 Main Fan 71
2.5.23 Pick-Up Clutch 71
2.5.24 Deskew Clutch 72
2.5.25 Pick-Up Clutch (Manual Tray) 72
2.5.26 Manual Tray Pad 72
2.5.27 Main Tray Pad 73
2.5.28 Rear Cover 74
2.5.29 Rear Fab 74
2.5.30 LPH (for model with LPH) 75
2.5.31 LSU (for model with LSU) 76
2.5.32 Drum Contact Spring 77
2.5.33 Check the Network Port 77
Chapter 3 Adjustment and Renew Settings after Replacement 78
3.1 Main Board Replacement 78
3.1.1 Adjustment after Replacement 78
3.1.2 Preparation 78
Chapter 4 Care and Maintenance 79
4.1 Notice before maintenance 79
4.2 Preparation before Replacement 80
4.4 Regular Cleaning 82
4.4.1 Cleaning the Inside of the Printer 82
4.4.2 Cleaning the Corona Wire 83
Appendix 1: Installing the printer driver 1
Appendix 2: AM3XTEST – The tool to find log 1
Appendix 3: Check the printing quality via PrintTest Tool 1

Похожие документы

Похожие документы по той же теме
Офис и мебель / Техника для печати / Лазерные принтеры

Принтер Deli P3100DN

70 стр.
Офис и мебель / Техника для печати / Лазерные принтеры

Принтер Deli P3100DN

70 стр.