Инструкция принтер лазерный Катюша P130

4
Poor grounding of the fuser.
Replace the fuser.

5
Power Supply Board
malfunctioned.
Replace the Power Supply Board.


User Check
(1). Clean the corona wire on the drum unit.
(2). Slide the corona wire back to the position marked "▲".
(3). This problem will disappear after printing for a few
pages.
(4). Wipe off the dirt on the drum unit with a cotton swab,
refer to <Cleaning Method of the Drum Unit>.
(5). Replace the drum unit.

■ Vertical Lines

Step
Cause
Solution

1
Dirt on the paper path.
Wipe off the dirt.

2
Dirt on the charger.
Clean the charger of the drum unit.

3
Scratches or dirt on the fuser.
Replace the fuser.

4
Toner Cartridge lifetime ends
Replace the toner cartridge.

5
LPH or LSU malfunctioned.
Replace LPH or LSU.


User Check
(1) Check the environment. High or low
temperature/humidity may cause the problem.
(2) Check if the paper is damp.
(3) Replace the toner cartridge.

Step
Cause
Solution

1
Toner remains low
Replace the toner cartridge.

■ Blur Image

2
Poor positioning of LPH/LSU
Check if LPH/LSU is working OK, arrange
the LPH ground cables; or replace drum if
drum is damaged.
Power Supply Board
malfunctioned.
Replace the Power Supply Board.


User Check
(1) Check if the LSU has been installed well.
(2) Check if the LSU is functioned well.
(3) Replace the LSU.


Image Distortion (For LSU model only)

Step
Cause
Solution

Confidential
35