Текст страницы
en
Environmental protection and saving energy 3 Environmental protec-
Installation and connection 4 Installation and con-
tion and saving energy
nection
Environmental protection and saving energy
Installation and connection
3.1 Disposing of packaging
4.1 Unpacking the appliance
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶Sort the individual components by
type and dispose of them separ-
ately.
ATTENTION!
Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.
▶Remove these objects, along with
3.2 Save energy and con-
all supplied accessories, from the
drum before starting the appliance.
serve resources
1. Remove any packaging and pro-
If you follow these instructions, your
appliance will use less electricity and
less water.
¡ Choose programs with low temper-
tective covers completely from the
appliance.
→ "Disposing of packaging",
Page 11
2. Check the appliance for visible
atures and longer wash times and
use maximum load capacity.
→ Page 22
¡ Add detergent based on the laun-
damage.
3. Open the door. → Page 27
4. Remove any accessories from the
dry's degree of soiling.
¡ Reduce the washing temperature
drum.
5. Close the door.
for lightly and normally soiled laun-
dry.
¡ Set the maximum spin speed if
4.2 Contents of package
you want to dry the laundry in the
tumble dryer afterwards.
¡ Wash the laundry without prewash.
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
3.3 Energy saving mode
If you do not use the appliance for a
brief period, it automatically switches
to energy-saving mode. All displays
go out and Start / Reload
flashes.
Energy-saving mode ends when you
use the appliance again.
ATTENTION!
If the appliance is operated with in-
complete or defective accessories,
the appliance may not be able to op-
erate properly, or this may result in
material damage or damage to the
appliance.
▶Do not operate the appliance with
incomplete or defective accessor-
ies.
11