Текст страницы
en
In the event of a blocked or covered
outlet, accumulated wastewater can
flow back into the appliance.
▶Before operating the appliance, en-
The connection details of the appli-
ance can be found under Tech-
nical data → Page 46.
2. Check the mains plug is inserted
properly.
sure that the wastewater drains
away quickly and eliminate any
blockages.
4.6 Aligning the appliance
Note: Observe the draining heights.
The maximum draining height is
100 cm.
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
1. Use a WAF 17 wrench to loosen
the lock nuts in a clockwise direc-
tion.
Siphon
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Sink
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 26
2. To align the appliance, turn the ap-
Plastic pipe with
rubber sleeve or
gully
pliance feet. Check that the appli-
ance is level using a spirit level.
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 26
All appliance feet must stand firmly
on the ground.
Connecting the appliance to the
electricity supply
Note: Your electrical domestic install-
ation for this appliance must comply
with the local legal provisions and
safety regulations, and should in-
clude a residual current circuit-
breaker.
1. Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
15