Инструкция стиральная машина Bosch WAN24168BY

en

17.1 Emergency release

Transportation, storage and disposal 18 Transportation, stor-

age and disposal

Transportation, storage and disposal

Releasing the door
Requirement: The drain pump is
empty. → Page 33

18.1 Removing the appliance

1. ATTENTION! Escaping water may

cause material damage.
▶Do not open the door if you can

1. Turn off the tap.
2. Empty the water inlet hose.
3. Switch off the appliance.

see water through the glass.
Pull the emergency release down-
wards with a tool and release.

→ Page 30
4. Unplug the appliance's mains plug.
5. Drain the water.

→ "Cleaning the drain pump",
Page 33
6. Detach the hoses.

18.2 Inserting the transit

bolts

Secure the appliance before trans-
portation using transit bolts in order
to prevent transport damage.
1. Use a screwdriver to remove the

a The door lock is released.

cover cap1.

2. Insert the maintenance flap and

lock it into place.
3. Close the maintenance flap.

17.2 Reset electronic card

1. Restart the appliance.
2. If the fault occurs again, discon-

nect the appliance from the power
supply for at least 30 seconds.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
3. If the fault persists, call customer

Retain the cover cap.
2. Insert the 4 transit bolts.

service. → Page 44
Please specify the exact error mes-
sage when calling. If possible, doc-
ument the fault with photos and
videos.

1 The number of cover caps varies depending on the model.

43