Текст страницы
en
Basic settings 15 Basic settings
2. Press Start / Reload
and, at
the same time, turn the pro-
gramme selector to position 2.
a The display shows the current
Basic settingsYou can configure the basic settings
for your appliance to meet your
needs.
value.
3. Use the programme selector to se-
15.1 Overview of the basic
settings
lect the required basic setting.
→ Page 31
4. To change the value, press Fin-
ished in
.
5. To save the changes, switch off
the appliance.
Cleaning and servicing 16 Cleaning and servi-
cing
1
2
3
4
5
Cleaning and servicingTo keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Cleaning the drum
Programme selector with programme
positions
Clean the drum if you have carried
out 20 washing cycles at a temperat-
ure of 40 °C or lower, if
flashes,
or if you have not used the appliance
for a prolonged period, but at least
once a year.
2
Set the volume of the signal
at the end of the programme:
0 (off) to 4 (very loud)
3
Set the volume of the signal
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
4
Activate (On) or deactivate
(OFF) the reminder to clean
the drum.
5
Display the number of fin-
ished programmes.
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶Regularly run a programme for
15.2 Changing the basic set-
tings
cleaning the drum or wash at tem-
peratures of at least 60 °C.
▶Leave the appliance to dry after
1. Set the programme selector to po-
sition 1. → Page 31
every operation with the door
open, and leave the detergent
drawer to dry.
▶Run the
Drum Clean pro-
gramme without laundry but with
washing powder that contains oxy-
31