Текст страницы
en
1. Slide the measuring aid forwards.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End" .
13.9 Soaking laundry
2. Fold the measuring aid down and
click it into place.
Note: No additional detergent is re-
quired for soaking. The appliance
uses the filled detergent for soaking
and washing.
Requirements
¡ The laundry is placed in the appli-
ance. → Page 28
¡ A programme has started.
→ Page 29
1. Press Start / Reload
approx.
10 minutes after the programme
start.
The programme pauses and the
laundry can soak.
2. Press Start / Reload
after the
required soaking time.
13.7 Adding detergent and
care product
13.10 Adding laundry
Note: Observe the information about
detergents and care products
→ Page 27.
- Pull out the detergent drawer.
- If required, use the dosing aid.
→ Page 28
3. Pour in the detergent.
→ "Detergent drawer", Page 17
4. If required, add the care product.
5. Push in the detergent drawer.
13.8 Starting the programme
After the programme starts, you can
remove or add laundry depending on
the programme status.
1. Press Start / Reload
.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 20
2. Open the door. → Page 27
3. Add or remove laundry.
4. Close the door.
5. Press Start / Reload
.
Requirement: A programme is set.
→ Page 27
▶Press Start / Reload
.
29