Инструкция точка доступа TP-Link EAP225 v4

1.2 Connect Network Devices

To connect your EAPs to the local network, refer to the following topology.

1.2.1 Connect Common APs

Gateway/Router

Wireless Bridge

EAP
Bridge AP (Main AP)
Bridge AP (Client AP)

EAP

Management Clients

Note:

• Before you start, be sure to power up and connect your devices according to the above topology.

• A DHCP server (typically a gateway/router with the DHCP function enabled) is required to assign
IP addresses to the EAPs and clients in your local network.

1. Connect your gateway/router to the internet.

2. Connect the EAPs to the LAN ports of your gateway/router.

For a Bridge kit product, connect one EAP to your gateway/router. This EAP will work

as the Main AP. The other EAP in the kit will automatically connect to the Main AP via

wireless bridge and work as the Client AP (Sub AP).

3. Connect your wireless clients such as phones, tablets and laptops to the WiFi of an

EAP. The default SSIDs are printed on the EAP.

4. Now you can surf the internet on your phones, tablets and laptops. For network

security, we recommend that you further complete the initial setup.

Note:

If you cannot access the internet, follow the FAQ to troubleshoot the problem.

6