Текст страницы
Follow the steps below to configure Load Balance:
1. Click a band on which the load balance feature will take effect.
2. Check the box to enable Load Balance.
3. Specify the maximum number of clients who can connect to the EAP at the same time.
While the number of connected clients has reached the limit and there are more clients
requesting to access the network, the EAP will disconnect those with weaker signals.
4. Click Save.
Airtime Fairness
Note:
Airtime Fairness is only available on certain devices. To check whether your device supports this
feature, refer to the actual web interface.
With Airtime Fairness enabled, each client connected to the EAP can get the same amount
of time to transmit data, avoiding low-data-rate clients to occupy too much network
bandwidth.
Compared with the relatively new client devices, some legacy client devices support
slower wireless rate. If they communicate with the same EAP, the slower clients take more
time to transmit and receive data compared with the faster clients. As a result, the overall
wireless throughput of the network decreases.
Therefore we recommend you check the box to enable this function under multi-
rate wireless networks. In this way, the faster clients can get more time for the data
transmission and the network overall throughput can be improved.
Note:
With Airtime Fairness enabled, 50 wireless clients at most can connect to the EAP in 2.4GHz band.
29