Инструкция точка доступа TP-Link EAP225 v4

Tips:
If you want to power your EAPs using a PoE switch, refer to the following topology.

Gateway/Router

PoE Switch

Wireless Bridge

EAP
Bridge AP (Main AP)
Bridge AP (Client AP)

EAP

Management Clients

1.2.2 Connect GPON APs

GPON AP

Gateway

Switch
OLT
Optical Splitter
SIP Server

Clients

Telephone

GPON AP

Note:

• Before you start, be sure to power up and connect your devices according to the above topology.

• A DHCP server (typically a gateway/router with the DHCP function enabled) is required to assign
IP addresses to the EAPs and clients in your local network.

1. Connect your gateway to the internet.

2. Connect the EAPs to the OLT via optical splitters.

7