Инструкция точка доступа TP-Link EAP225 v4

8.2 Build the Network Topology

Build the network topology as the following figure shows.

Switch
Router (DHCP Server)
LAN: 192.168.88.1
Internet

Management Host

EAP

• The router is the gateway of the network and acts as a DHCP server to assign dynamic

IP addresses to the management host, EAP and clients. The LAN IP of the router is

192.168.88.1/24.

• Connect the switch to the LAN port of the router.

• Connect the management host and the EAP to the switch. The IP address mode of

the management host and EAP is dynamic, which means that they will get dynamic IP

addresses from the router.

Tips:

If the router has more than one LAN port, we can also respectively connect the management host
and the EAP to the LAN ports of the router.

116