Инструкция точка доступа TP-Link EAP225 v4

3.1.2 Configure Wireless Advanced Settings

Proper wireless parameters can improve the performance of your wireless network.

This section introduces how to configure the advanced wireless parameters of the EAP,

including Radio Setting, Load Balance, Airtime Fairness and More Settings.

Radio Setting

Radio settings directly control the behavior of the radio in the EAP and its interaction with

the physical medium; that is, how and what type of signal the EAP emits.

Note:

For Sub-APs, the Wireless Mode, Channel Width, and Channel will follow the settings of their Main
AP and cannot be edited.

Select the frequency band and configure the following parameters.

Wireless Mode
Select the IEEE 802.11 mode the radio uses.

• For 2.4GHz:

802.11b/g/n/ax/be mixed is recommended so that all of 802.11b, 802.11g,
802.11n, 802.11ax, and 802.11be clients operating in the 2.4GHz frequency
can connect to the AP. Note that some devices may not support 802.11ax
and 802.11be; in this case, select the one with most types mixed.

• For 5GHz:

802.11a/n/ac/ax/be mixed is recommended so that all of 802.11a, 802.11n,
802.11ac, 802.11ax, and 802.11be clients operating in the 5GHz frequency
can connect to the AP. Note that some devices may not support 802.11ax
and 802.11be; in this case, select the one with most types mixed.

• For 6GHz:

802.11ax/be mixed is recommended so that all of 802.11ax and 802.11be
clients operating in the 6GHz frequency can connect to the AP. Note that
Wi-Fi 6E devices support 802.11ax only.

27