Текст страницы
To configure an MLO network, go to Wireless > Wireless Settings > MLO and click Add.
Configure the parameters and save the settings.
SSID
Specify a name for the MLO network.
Band
Select the bands to form the MLO network. Available band options may
vary by model.
SSID Broadcast
With the option enabled, AP will broadcast the SSID to the nearby hosts,
so that those hosts can find the wireless network identified by this SSID.
If this option is disabled, users must enter the SSID manually to connect
to the AP.
Configure the security settings of the wireless network.
For detailed instructions, refer to 3.1.1 Configure SSIDs.
Security Mode/
Version/
Encryption
Guest Network
With this option enabled, guest network will block clients from reaching
any private IP subnet.
Rate Limit
With this option enabled, the download and upload rate of each client
which connects to the SSID will be limited to balance bandwidth usage.
You can limit the download and upload rate for some specific clients by
configuring rate limit in client list, refer to View Client Information to
get more details.
Note that the download and upload rate will be limited to the smaller
value if you set the limit value both in SSID and client configuration.
32