Текст страницы
Follow the steps below to configure External Radius Server as the portal authentication
type:
1. Select the SSID on which the portal will take effect.
2. Build a RADIUS server on the network and make sure that it is reachable by the EAP.
3. Go to the Portal configuration page on the EAP. Select External Radius Server as the
authentication type.
3. Configure the relevant parameters as the following table shows:
RADIUS Server IP
Enter the IP address of RADIUS server.
RADIUS Port
Enter the port of the RADIUS server.
RADIUS Password
Enter the password of the RADIUS server.
NAS ID
Configure a Network Access Server Identifier (NAS ID) using 1
to 64 characters on the portal. The NAS ID is sent to the RADIUS
server by the EAP through an authentication request packet. With
the NAS ID which classifies users to different groups, the RADIUS
server can send a customized authentication response.
RADIUS Accounting
Enable or disable RADIUS accounting feature.
Accounting Server IP
Enter the IP address of the accounting server.
Accounting Server Port
Enter the port number of the accounting server.
Enter the shared secret key of the accounting server.
Accounting Server
Password
Interim Update
With this option enabled, you can specify the duration between
accounting information updates. By default, the function is
disabled.
Enter the appropriate duration between updates for EAPs in
Interim Update Interval.
Interim Interval
With Interim Update enabled, specify the appropriate duration
between updates for EAPs. The default duration is 600 seconds.
Authentication Timeout
Specify the value of authentication timeout.
A client’s authentication will expire after the authentication
timeout and the client needs to log in to the authentication page
again to access the network.
Options include 1 Hour, 8 Hours, 24 Hours, 7 Days, and Custom.
With Custom selected, you can customize the time in days, hours,
and minutes.
39