Инструкция точка доступа TP-Link EAP225 v4

3. In the Scheduler Association section, configure the scheduler rule. There are two

association modes: Association with SSID and Association with AP. The following

sections introduce how to configure each mode.

■Association with SSID

If you select Association with SSID in step 1, the Scheduler Association table will

display all the SSIDs on the EAP. For each SSID, you can select a profile in the Profile

Name column and select the scheduler rule (Radio On/Radio Off) in the Action column.

Then click Save.

For example, the following configuration means that during the time range defined in

Profile2, the radio of SSID SSID-1 is on and the radio of SSID SSID-2 is off.

■Association with AP

If you select Association with AP in step 1, the Scheduler Association table will display

the name and MAC address of the EAP. Select a profile in the Profile Name column and

select the scheduler rule (Radio On/Radio Off) in the Action column. Then click Save.

For example, the following configuration means that during the time range defined in

Profile2, the radio of all SSIDs on the EAP is on.

49