Текст страницы
Registrar Port
Typically 5060, unless your telephony provider specifies a different
port.
SIP Proxy
Usually the domain name of the SIP Proxy Server, if not, an IP address.
SIP Proxy Port
Typically 5060, unless your telephony provider specifies a different
port.
Outbound Proxy
Usually the domain name of the Outbound Proxy Server, if not, an IP
address.
Outbound Proxy
Port
Typically 5060, unless your telephony provider specifies a different
port.
Register via
Outbound Proxy
When enabled, the EAP will use the specified Outbound Proxy for
registration. When disabled, the EAP will use the Registrar Address
above for registration.
3. Click OK.
■Advanced Settings
Refer to the following table to configure advanced settings if needed:
Locale Selection
Select your location. The EAP is embedded with the default location-
based parameters such as ring tones.
DSCP for SIP/
DSCP for RTP
DSCP (Differentiated Services Code Point) is the first 6 bits in the
ToS (Tpye of Service) byte. DSCP marking allows you to ensure
preferential treatment for higher-priority traffic on the network
based on the DSCP value. Select DSCP for the SIP (Session Initiation
Protocol) and RTP (Real-time Transport Protocol) respectively. If you
are unsure, please keep the default value.
DTMF Relay
Setting
Select a protocol for DTMF relay setting. If you are unsure of which
one to select, please keep the default value.
Enter the expiration time of the SIP registration.
Registry Expiration
Time
74