Текст страницы
Troubleshooting en
Enjoy the finished peanut butter spread
directly onto bread or use it as a season-
ing.
Retrieve more recipes
To retrieve more recipes online, scan the
following QR code.
Note: The recommended continuous oper-
ating time is 2 minutes.
Tip: Season salads, sauces and other
dishes with the ground peanuts or make
them into crunchy peanut butter.
Crunchy peanut butter
Preparation
Process the ground peanuts another two
times with the fine perforated disc.
Add 10 ml peanut oil or vegetable oil for
every 100 g peanuts.
Stir the mixture with a whisk until creamy.
TroubleshootingTroubleshooting
Fault
Cause and troubleshooting
Rotary switch is set incorrectly.
Appliance does not start
processing.
Set the rotary switch to before processing.
Food is not being pro-
cessed although the
main unit is running.
Food has got stuck and is blocking the attachment.
Note: Only use the reversing function with the meat mincer at-
tachment.
1. Set the rotary switch to and wait until the appliance stops.
2. Set the rotary switch to for a few seconds to start the re-
versing function and release the food that has got stuck.
3. Wait until the appliance stops.
4. Set the rotary switch to
and check whether the food is
being processed normally again.
Note: If the fault cannot be eliminated in this manner, observe
the following steps.
1. Set the rotary switch to and wait until the appliance stops.
2. Remove the attachment and take it apart.
3. Remove food that has got stuck und check whether the at-
tachment or the food contains any sinews, bones or other
hard pieces.
The clutch of the worm conveyor has been overloaded and
has broken at the predetermined breaking point.
Note: Spare parts with a predetermined breaking point are not
covered by our warranty obligations. A new clutch is available
from customer service under order number 10039417.
1. Release the screw and remove the faulty clutch.
Fig. 44
2. Insert the new clutch and screw in tight.
Fig. 45
Appliance switches off
during processing.
Motor is overheated.
1. Set the rotary switch to and wait until the appliance stops.
2. Allow the appliance to cool down to deactivate the overload
protection device.
23