Инструкция принтер лазерный Катюша P130

(1) Turn off and then on the power.
(2) Turn off the power.

Step
Cause
Solution

1
Thermistor malfunctioned
Replace the fuser.

2
The main board malfunctioned.
Replace the main board.

Fuser Error (201616)
Fuser heating from ready to printing exceeds 20 seconds.
< User Check >
(1) Turn off power and then turn on.
(2) Turn off the power.

Step
Cause
Solution

1
Used voltage too low
Check power and avoid using
overloaded electrical appliances on the
same line.
2
Thermistor failed.
Replace the fuser.

3
Main board malfunctioned
Replace the main board..

Fuser Error (201617)
Fuser heating from ready to warming up exceeds 155 seconds.
< User Check >
(1) Turn off power and then turn on.
(2) Turn off the power.

Step
Cause
Solution

1
Used voltage too low.
Check power and avoid using
overloaded electrical appliances on the
same line.
2
Thermistor failed.
Replace the fuser.

The fuse of the fuser broken,
activate protection mechanism
Replace the fuse.

3
Main board malfunctioned
Replace the main board..

4
Power Supply Board
malfunctioned.
Replace the Power Supply Board.


Fuser Error(201618)
Fuser heating from prepare to ready status exceeds specified time error. (100secs))
< User Check >
(1) Turn off and then on the power.
(2) Turn off the power.

Step
Cause
Solution

1
Abnormal AC power supply
voltage
Please check the power.

2
Thermistor malfunctioned.
Replace the fuser.

3
Main board malfunctioned.
Replace the main board.

Fuser Error(201621)
The thermistor in the middle of the Fuser is not connected.
< User Check >
(1) Turn off and then on the power.
(2) Turn off the power.

Step
Cause
Solution

1
Thermistor malfunctioned.
Replace the Fuser.

Confidential
17