Текст страницы
23 ** Upholstery nozzle for dry vacuum cleaning
24 ** Crevice nozzle for dry vacuum cleaning
25 * Extra long crevice nozzle for dry vacuum cleaning
*
26 ** Switchable floor nozzle for carpets and hard
floors for dry vacuum cleaning
27 ** Detergent RM 519 (100 ml)
28 ** Detergent RM 519 (1000 ml)
*
* depending on different configurations
Initial startup
Note
To remove the device head, the fresh water tank must
first be removed and the carrying handle folded down at
the side.
1. Plug the spray suction tubes together and connect them
to the suction hose. All parts must audibly engage.
Illustration I
2. Attach the spray extraction floor nozzle to the spray
suction tubes until it audibly engages.
Note
Use the hard floor attachment for hard floor cleaning.
●
Fit the hard floor attachment on the spray extraction
floor nozzle until it audibly engages.
The squeegee points to the front, the brush strips to
the back.
Illustration J
Upholstery cleaning
Depending on requirements, use the spray extraction
upholstery nozzle or spray extraction crevice nozzle to
clean e.g. upholstery and mattresses.
●
Attach the spray extraction upholstery nozzle or
crevice nozzle to the handle of the suction hose until
it audibly engages.
Illustration K
Illustration L
Removing the fresh water tank
1. Press the unlocking button.
2. Removing the fresh water tank.
Illustration B
Taking off the device head
1. Pull the carrying handle forwards.
Illustration C
The device head is unlocked.
2. Take off the device head.
Illustration D
Installing the steering rollers
1. Remove the steering rollers from the container.
Illustration D
2. Turn the container upside down.
3. Push the steering rollers into the openings at the
bottom of the container as far as they will go.
Illustration E
4. Turn the container upside down.
Fitting accessories for wet and dry vacuum
cleaning
1. For floor cleaning, plug the spray suction tubes to-
gether and connect them to the suction hose. All
parts must audibly engage.
Illustration I
2. Slide the floor nozzle on to the spray suction tubes.
Illustration M
3. Depending on the floor covering and cleaning re-
quirements, make sure that the floor nozzle inserts
or settings are correct.
Note
Using the floor nozzle with inserts
●
For carpet cleaning, use the insert for carpets.
●
For cleaning dry dirt, hard floors or water - use the
hard floor insert (brush strips and squeegee).
Illustration N
Note
Using the switchable floor nozzle
●
Only use it to vacuum clean dry dirt.
●
Fitting the device head
1. Place the device head on the container.
2. Pull the carrying handle up.
The device head is locked.
Illustration F
●
Installing the fresh water tank
1. Insert the fresh water tank at the bottom.
2. Press the top of the fresh water tank against the de-
vice head.
3. Make sure that the fresh water tank is engaged.
Illustration G
For carpet cleaning, use the position with the brush
strips retracted on the underside.
For hard floor cleaning, use the position with the
brush strips extended on the underside.
Illustration O
4. To clean upholstered furniture, for example, slide
the upholstery or crevice nozzle directly on to the
handle of the suction hose.
Illustration P
Connecting the suction and spray hose
1. Attach the suction and spray hose to the connection
on the device. Both parts must audibly engage.
Illustration H
2. Fit the accessory as required. See chapter Install-
ing accessories.
Disconnecting accessories
Disconnecting the accessory for spray extracting
1. Remove the hard floor attachment from the spray
extraction floor nozzle.
Illustration J
2.
Operation
3.
Installing accessories
Mounting the accessory for spray extracting
Floor cleaning
Use the spray extraction floor nozzle for cleaning car-
pets or hard floors (with hard floor attachment).
Press the unlocking button and disconnect the spray
extraction floor nozzle from the spray suction tubes.
Illustration J
Press the unlocking button and disconnect the spray
suction tubes from each other.
Illustration I
4. Press the unlocking button on the spray extraction
upholstery or spray extraction crevice nozzle and
disconnect it from the suction hose.
Illustration K
Illustration L
English
13