Текст страницы
Group Key
Update Period
Specify an update period of the encryption key. The update period
instructs how often the device should change the encryption key. 0
means that the encryption key does not change at anytime.
3. Click Apply, then click Save.
5.4 Configure Multi-SSID
Note:
Multi-SSID submenu is only available in Access Point Mode.
The device can build up to four virtual wireless networks for users to access. When the
Multi-SSID function is enabled, the VLAN function is enabled at the same time. It can work
together with switches supporting 802.1 Q VLAN and supports maximum four VLANs. The
device adds different VLAN tag to the clients which connect to the corresponding wireless
network. The clients in different VLANs cannot directly communicate with each other.
The wired client can communicate with all the wireless clients despite the VLAN settings.
1. Go to the Wireless page. In the Multi-SSID section, Enable Multi-SSID. Click Add and
create a new wireless network.
SSID
Specify the SSID of the wireless network.
VLAN
Specify the VLAN to which the new wireless network belongs. The valid
value ranges from 1 to 4094.
SSID Broadcast
Enable or disable SSID broadcast . With this feature enabled, the device
will broadcast the SSID.
AP Isolation
Enable or disable AP Isolation. With this feature enabled, all the hosts
cannot communicate with each other.
105